Mandrel, Sandpaper Split Type
Mandrel, Screw Type 3/32" and 1/8" Shank
Handpiece, #44T, Tapered, w/ 1/4”, 1/8” & 3/32” Collets
Radial Bristle Disc Assortment Kit, 3/4” dia., 6 each 80, 120, 220, 400 Grit - 1 each 3/32” and 1/8” Shank Mandrels M1 and M6
Radial Bristle Disc Assortment Kit, 9/16” dia., 6 each 120, 220, 400, 1,200, 3,000, & 14,000 Grit and 1 M1 3/32” Shank Mandrel
Tungsten Carbide Alumacut Burs 1/8” Shank
Handpiece, #28, Tapered, w/ 1/8” & 3/32” Collets
Angle Grinder AK69110 and H.30
Sanding Band, Aluminum Oxide, 1/4 X 1/2, 60 - 600 Grit, Pk-10
Handpiece, #50, Chisel, w/ set of 6 Chisels, A-KC503, A-KC504, A-KC505, A-KC509, & A-KC510
Foredom Belt Sander w/ 180 grit belt, hex key and 3 spare belts ea. 100, 180 and 240 grit and H.30 Handpiece w/ HPCK-0 Chuck Key
Sandpaper Belt Assortment, 10mm X 257mm
Plated Diamond Point, 2.35mm (3/32”) Shank, 125-180 Micron (120-200 Grit)
Rubber Sanding Drum Mandrel, 1/2” long, 1/8” Shank
Handpiece, #50, Chisel
Typhoon Burs, 1/4” Shank
Brass Trim Brush, 5/8” wide x 5-3/4” long with Bristles 3/8” wide x 1-3/4” long x 5/8” height
Carving Drill, 1/16” - 1/8” dia.
Woodcarving Kit w/ 1/3 hp TX Motor, SXR Cast Iron Foot Pedal Speed Control, H.44T Collet Style Handpiece & WK53 Accessory Kit, 115v
Collet Set #440 for Handpieces #44T, #44HT, #44TSJ, #43T & CHA-5, 1/16”, 3/32”, 3mm, 1/8”, 5/32”, 6mm & 1/4” Collets
Accessory Kit, 9 Piece, CeramCut Blue Stone Points with 3/32” Shank, CK300, CK301, CK302, CK318, CK322, CK332, CK342, CK352 & CK392
Typhoon Disc, Flat Face Carving Wheel, 2” dia. w/3/8” Arbor Hole
Rubber Sanding Drum Mandrel, 3/32” Shank
Woodcarving Kit w/ 1/6 hp SR Motor, EM Dial Control Speed Control, H.44T Collet Style Handpiece, & WK53 Accessory Kit, 115v
Dial Control Kit for 115V TX or LX, EMX-1, #50 hp, 11 Chisels A-KC501, A-KC502, A-KC503, A-KC504, A-KC505, A-KC506, A-KC507, A-KC508, A-KC509, A-KC510, A-KC511
Collet Set 600 for Handpieces #8, #8D, #8SJ, #28 & #28SJ Handpieces, 1/32”, 1/16” & 3/32” Collets
Mandrel, Straight Taper Type, 5/16” dia. Shoulder x 1/4” dia Arbor Screw with 1/4” Shank
Typhoon Bur, 1/8” Shank
Flap Wheel, Aluminum Oxide, 3/4” dia. x 3/16” wide with 1/8” Shank, 60 - 120 Grit
Abrasive Cleaner, 3” long x 3” wide x 1-1/2” height
Woodcarving Kit w/ 1/6 hp SR Motor, FCT Plastic Foot Pedal Speed Control, H.44T Collet Style Handpiece & WK53 Accessory Kit, 115v
Deluxe Woodcarving Kit w/ 1/6 hp SR Motor, SCT Cast Iron Foot Pedal Speed Control, H.44T & H.28 Collet Style Handpieces + More
